Produse pentru allpremed hidrodm (9)

4-Hydroxycoumarin belongs to the group of coumarin derivatives. The intermediate is used in the pharmaceutical and agricultural industry. It is used mainly for anticoagulants such as Warfarin and rodenticides. Name:4-Hydroxycoumarine CAS Number:1076-38-6 Use:Warfarin Intermediate Use 2:Rodenticide Synonym:4-Hydroxy-2H-chromen-2-one Synonym 2:4-Coumarinol Synonym 3:Benzotetronic acid

Used to make filling primers for HYDRONYLON ® HN on bituminous felt substrates. CONSUMPTION: 2 kg/m 2 – using SW-1 technical mesh APPLICATION: Apply the first layer of HYDRONYLON ® HP on the prepared substrate using a brush or broom . After the first layer has dried, apply the second layer of HYDRONYLON ® HP through a SW-1 technical mesh (it is also permissible to apply the first layer of HYDRONYLON ® HP directly on the prepared substrate through a SW-1 technical mesh). The base coat should be made in at least two layers. PACKAGING:25 kg COLOUR:Grey

Fluid Therm Multi-purpose Additive solution specific for the improvement of thermal conductivity of concretes, through balanced superlubricating, defoamer, plasticiser type actions. Fluid Therm is perfectly compatible in combination with steel Readymesh MM-150 (usually dosed at 25 kg/m³) or multifilament Readymesh PM-180 (usually dosed at 1 kg/m³) polypropylene fibres In radiant panel heating systems , the presence of high air content in the concrete forming the levelling screed can cause the correct spread of thermal energy to be severely obstructed; on the other hand, the conglomerate incorporates air already in the mixing phase in the form of microbubbles, while the excess mixing water and the segregation mechanisms that occur during transport and casting contribute to including additional quantities of air in the form of macrobubbles in the conglomerate. In this context, the peculiar defoamer, superlubricating and antisegregative actions of Fluid Therm, are particularly valuable as they allow the production of grouts and concretes with very low air content. Packaging: 10 kg canister UM: €/kg

Mineral Plus

Chlorwasserstoff zur Synthese von Chemischen Produkten und Pharmaprodukten, Anwendung in der Pharmaindustrie, Oberflächenbehandlung, Ätzen von Metallen.

Il est un biofertilisant foliaire à base de Zinc et Cuivre complexés avec hydracided’acide citrique, obtenu de forme naturelle.Il agit aussi comme correcteur de carences avec une petite quantité de Zinc et Cuivre, avec un haut niveaud’efficience fertilisant et avec une basse consommation énergétique par la plante.En conséquence on améliore l’état physiologique de la plante et il augmente indirectement la défensenaturelle, induit une meilleure résistance au stress et aux maladies produites par bactéries etchampignons. Il est un biofertilisant foliaire à base de Zinc et Cuivre complexés avec hydracided’acide citrique, obtenu de forme naturelle.Il agit aussi comme correcteur de carences avec une petite quantité de Zinc et Cuivre, avec un haut niveaud’efficience fertilisant et avec une basse consommation énergétique par la plante.

liquid roof coating kit . PACKAGING:5kg, 25kg CONSUMPTION:0.25 kg/m2 COLOUR:graphite

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Osmocem N gray Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc. The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof. Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats. Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160. Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made. Packaging: 25 kg bag UM: €/kg